In this first picture you will see the frame that the die cuts. I laid it on top of a piece of lightweight cardstock I will fasten it to. I used tape around the edges and on the inside strips I used a bit of Mono Adhesive glue. I used my Copic marker over the inside lines to come close to the color of the frame. I will show you why next.
When laying down the frame follow the outside edges of the bottom cardstock exactly. Smooth the inside strips after the outside frame is in place. The frame is wobbly and you want it to be perfectly straight or the inside blocks will not fit correctly. Now you get to start using the die to cut scraps of paper to fit in the blocks.
This is my first block glued in place. See that little crack at the top and bottom of the block? You can't see it? You can't see it because I colored that space with the marker. If you use a sheet of white paper to lay the frame on you will see that crack and it stands out like a sore thumb.
This is the finished card. I glued a star to the bottom block and a popped up button on the top.
